Minimum Order: 1 Sets
Terms Of Payment: wire transfer Capacity: 27 Sets per Month
Delivery Time: 4 - 5 Days
Country Of Origin: Indonesia
Mimaki CJV30 series printer cutters increase your productivity by integrating printing and cutting into one device. Unique features allow continuous unattended printing and cutting.
- Continuous Crop Mark Detection increases cutting accuracy.
- Automatic Media Clamp Function allows continuous printing and cutting.
- High density, fast drying white ink widens usage of applications
- UISS (Uninterrupted Ink Supply System) improves operating performance by allowing continuous unattended printing.
- Up to 1440 dpi (variable dot technology)
- Printing speeds:
- 186 sqft/hr (17.3 m2/hr) at 540 x 720 dpi, 4 pass
- 126 sqft/hr (11.7 m2/hr) at 540 x 1080 dpi, 6 pass
- 78.5 sqft/hr (7.3 m2/hr) at 720 x 1440 dpi, 8 pass
- Cutting speeds:
- up to 11.8 in/sec (30 cm/sec)
- Simple Studio and Fine Cut software included for easy sticker making. For professional users, Raster Link Pro4 SG RIP is included as standard.
|Maximum print /
|610 mm (24.0")||1,020 mm (40.1")||1,361 mm (53.5")||1,610 mm (63.3")|
|Print resolution||540 dpi, 720 dpi, 1440 dpi|
(Scan x Feed)
|540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi|
|720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi|
|1,440 x 1,440dpi|
|Ink||Kind||Exclusive solvent ink: SS21 ink, ES3 ink|
|Capacity||4-color mode: 440 cc cartridge x 2/color, 880 cc/color|
|6-color mode: 440 cc cartridge x 1/color, 440 cc/color|
|Media||Width||620 mm (24.4")||1,030 mm (40.5")||1,371 mm (53.9")||1,620 mm (63.7")|
|Thickness||Less than 1.0 mm|
|Roll weight||Less than 25 kg (55 lbs.)|
|Roll diameter||Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")|
|Maximum cutting speed||30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)|
|Cutting force||10-350 g|
|Applicable tools||Cutter, Water based ball-point pen,
Oil based ball-point pen
|Media cutting||Cutting in Y direction by cutter on the head|
|Media heater||Pre/print/post heater|
|Media take-up device||Roll take-up device (Standard), inside/outside selectable|
|Command||MRL-III , MGL-IIc2|
|Applicable standard||VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
|Power||AC100V~240V, Less than 1,380VA|
|Operation environments||20°C~35°C, 35~65%RH (No condensation)|
(W x D x H)
|1,524 x 739 x
(60" x 29.1" x
|1,934 x 739 x
(76.1" x 29.1" x
|2,289 x 739 x
(90.1" x 29.1" x
|2,538 x 739 x
(99.9" x 29.1" x
- Some of the samples in this website are artificial renderings.
- Specifications, design and dimensions stated in this website may be subject to change without prior notice(for technical improvements, etc).
- The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
- Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
There is no gratis term of a guarantee in CJV30 series main part.
Please be sure to join an annual maintenance contract.
Since it is with one periodic check per year, you can use in comfort.