Name & Type

EMC EMI Testing Laboratory

in Other Business Services, Type: sell

Images & Seller Information
  • EMC EMI Testing Laboratory
  • ITC INDIA Testing scope for the following standards
    1. Machinery testing IFC/EN 60204/ANZ 4024.1
    2. Liminaries IEC/EN 60598
    3. Electro Medical Equipment IEC/EN 60601
    4. Household Equipment IEC/EN 60335

 Country Of Origin: India
There are no specifications for this product
There are no additional information for this product

All electrical equipment generates some degree of electromagnetic emission as a side effect during operating condition. It also has the potential to be affected by incident electromagnetic energy Electromagnetic compatibility (EMC) testing ensures that any electrical or electronic product and appliance will operate without any malfunction in a electromagnetic environment at designed level of efficiency itself disturbing the operation of other components of the system.
The main sources of the Electromagnetic Interference (EMI) are unwanted electromagnetic radiations and electromagnetic waves. The entire electrical and electronic product emits high frequency wave during operation. If the level of the emission of is high and it will close enough to another device then it will degrade the efficiency of system.An electromagnetic interference may be an electromagnetic noise, an unwanted signal or a change in the propagation medium.

Electrostatic Discharge Gun:

Specification:Conforms to IEC/EN 61000-4-2Parameters value Air-discharge: 200 V to 30 kV (in 100 V steps)Contact-discharge: 200 V to 30 kV (in 100 V steps) Pre-programmed settings for IEC/EN 61000-4-2Accuracy better than ±5% (stabilized)

Multifunction Generator:

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)Pulse conforms to IEC/EN 61000-4-5Parameter Value Pulse voltage (open circuit) : ±200 V to 4.4 kV (in 1 V steps)Pulse current (short circuit) : ±100 A to 2.2 k A Impedance : 2/12 ΩPolarity: positive / negative / alternate Pulse repetition : 10 s, up to 600 s (in 1 s steps)Test duration : 1 to 9999 pulses, continuous Phase synchronization : asynchronous, synchronous 0 to 359º (in 1º steps)Coupling : external / internal

Harmonics & Flicker Measuring System:

Complete test system for IEC 61000-3-2 and -3-3
Single phase system up to 16 A
Simulated flicker impedance, no need for expensive physical impedance
Parameters value
Power output (AC mode) : 5,000 VA
Voltage AC, two ranges : 0-150 V and 0-300 V
Maximum current (low range) : 37.0 Amps, 110 Amps peak repetitive
Maximum current (high range) : 18.5 Amps, 96 Amps peak repetitive
Frequency range (AC mode) : 16 – 1000 Hz
Power output (DC mode)  : 3,500 watts
Voltage DC, two ranges : 0-200 V and 0-400 V
Coupling unit
Number of phases : 1
Measurement channels : 4
EUT connector : Front panel CEE 77
EUT connector : Rear panel Terminal block
Maximum voltage : Front panel 240 Vac
Maximum current : Front panel 16 Arms
Maximum voltage : Rear panel 300 Vac
Maximum current : Rear panel 40 Arms (200 A Pk for 10 ms)
Supply power : Voltage 115/230 Vac +/- 10%
Supply power : Current <0.5 A
Supply power : Frequency 50/60 Hz
Dimensions (HxWxD) : 89 x 427 x 560 mm
Weight : 5 kg


Submit Inquiry

Only logged-in users can submit inquiries to products. Please register or log-in first in order to submit an inquiry to this product.